Navigation

Gorilla®

Product Specifications

A premium-quality, multipurpose industrial hose with a wide range of applications in factories, construction, agriculture, quarries, mines, railroads, the oil and gas industry, and shipbuilding. All sizes are rated at 500 psi (3.4 MPa) maximum working pressure. Non-conductive, minimum electrical resistance greater than one (1) megaohm per inch of hose length at 1000 Volts DC.

Nitrile synthetic rubber, RMA Class A (High Oil Resistance)

Yellow Carbryn™ synthetic rubber, RMA Class A (High Oil Resistance) MSHA approved

Spiral aramid yarn, 2″ is braided synthetic yarn

-20°F to 190°F (-29°C to 88°C)

90% one piece reels up to 1 inch
3/16″- 3/4″ – 500′ reels, maximum 3 pieces, 50′ increments 1 • – 450′ reels, maximum 3 pieces, 50′ increments
1¼” – 250′-400′ reels, maximum 3 pieces, 50′ increments 1½” – 150′-300′ reels, maximum 3 pieces, 50′ increments 2· – 200· carton. maximum 3 pieces. 50′ increments Coupled assemblies available: 1/4″, 3/8″, 1/2″, and 3/4″.

Example: Gorilla® 1″ (25.4 mm) 500 psi. Made in U.S.A. Continental ContiTech. Flame Resistant USMSHA No. 2G-14C/14

IDNom. ODMax. WPWeight
in.mmin.mmPSIMPalb./ft.kg/m
1/46.40.6115.55003.450.170.25
3/89.50.7318.65003.450.220.33
1/212.71.0626.95003.450.280.42
5/85003.450.350.52
3/419.11.2832.55003.450.410.61
125.41.6341.45003.450.580.86
1 1/431.81.8847.85003.450.791.18
1 1/238.12.1253.85003.450.861.27
250.82.7068.65003.451.221.82

Ortac®

Product Specifications

Ortac® (Oil Resistant Tube and Cover) is our most popular premium-quality multipurpose hose. Used in the most abusive industrial applications. Ortac® will handle air. oil. water. kerosene and some chemicals. Non-conductive. minimum electrical resistance greater than one (1) megohm per inch of hose length: at 1000 volts DC. Available in 250, 300 and 400 psi working pressures. Note: Ortac• 400 Yellow is USMSHA approved.

Nitrile synthetic rubber. RMA Class A (High Oil Resistance)

Red or Yellow Carbryn'” synthetic rubber. RMA Class A (High Oil Resistance)

Spiral synthetic yarn, 2″ is braided

-20° F to 190° F (-29° C to 88° C)

90% one piece reels up to 1 inch
3/16″-3/4″ – 500′ reels, maximum 3 pieces. 50′ increments 1 • – 450′ reels. maximum 3 pieces, 50′ increments
1¼” – 400′ reels. maximum 3 pieces. 50′ increments
1½” – 300′ reels. maximum 3 pieces. 50′ increments
2″ – 200·. cartons. maximum 3 pieces. 50′ increments

Example: 1½” (38.1mm) Ortac® 300 psi WP. Made in U.S.A. Continental ContiTech

FS™ Air Hose

Product Specifications

A hybrid thermoplastic hose that provides durability and flexibility, is lightweight and has a low drag resistance. F5′” is non-marking, oil resistant and performs well under cold temperatures to -40°F (-40°C). This 300 psi hose is designed for a variety of pneumatic applications in industries such as construction and manufacturing.

Blue Flexible TPE, RMA Class B (Medium Oil Resistance)

Matte Blue Flexible TPE. RMA Class B (Medium Oil Resistance)

Polyester yarn

-40° F to 158° F (-40° C to 70° C)

The listed SAP numbers below are reeled hose: coiled lengths and assemblies are also available.

Example: F5′” 300 psi. Made in U.S.A. Continental ContiTech

IDNom. ODMax. WPWeight
in.mmin.mmPSIMPalb./ft.kg/m
1/46.60.5011.53002.070.060.09
5/167.90.5915.03002.070.090.15
3/89.80.6416.23002.070.100.16
1/212.70.8120.03002.070.160.24
3/418.91.1128.13002.070.260.36
125.41.371.372001.380.350.52

lnsta-Grip 300

Product Specifications

For use with push-on fittings at working pressures of 300 psi. For low-pressure hydraulic and pneumatic systems such as shop air systems. general industrial. maintenance and automotive assembly applications. Non-conductive. minimum electrical resistance. greater than one (1) megohm per inch of hose length at 1000 volts DC. MSHA approved covers.

Silicone is not used in the manufacturing of this hose. Chemivic'” oil and heat-resistant synthetic rubber, RMA Class A (High Oil Resistance)

Black. Green. Blue. Red. Yellow and Gray (others: contact customer service); MSHA approved, weather. abrasion and oil-resistant synthetic rubber. RMA Class B. (Medium Oil Resistance)

Braided (1) high-strength synthetic yarn laid at the most effective angle for maximum strength and coupling holding ability

-40° F to 190° F (-40° C to 88° C)

500′ reels. maximum 4 pieces. 1 o· minimum

Example: lnsta-Grip'” 1/4″ 300 psi WP Flame Resistant USMSHA 2G-IC-14C/33. Made in U.S.A. Continental ContiTech

IDNom. ODMax. WPBend RadiusWeight
in.mmin.mmPSIMPain.mmlb./ft.kg/m
3/166.60.5011.53002.073640.090.13
1/47.90.5915.03002.073640.050.07
3/89.80.6416.23002.073760.140.21
1/212.70.8120.03002.0751270.170.25
5/825.41.371.372001.3861520.200.30
3/418.91.1128.13002.0771780.260.39

FRONTIER 200 Multipurpose Hose

Product Specifications

An economical air and water hose, FRONTIER® is for a wide range of industrial, construction and agricultural applications. Available in 200, 250, and 300 psi
working pressures.

EPDM(compound)® synthetic rubber, RMA Class C (Limited Oil Resistance)

Black, Red, Yellow, Green or Blue EPDM(compound)® synthetic rubber

Spiral synthetic yarn, 2″ is braided

-40 ºF to 190 ºF (-40 ºC to 88 ºC)

Contact fitting manufacturer for proper fitting recommendation and coupling procedure.

Example: 1/2″ FRONTIER® Continental Contitech 200 psi WP

I.D.Nom O.D.LengthColorMax. Working Pressure (PSI)Weight
in.mm.in.mm.ft.lbskg
250.802.50063.50 mm200.000 ftRed2001.160 lb/ft
1.73 kg/m
Want to speak to a professional?

We have an incredible and hard working crew. Each of our team members take pride in what they do and will work tirelessly with you to ensure your project is completed above and beyond your expectations. Our Foster Hose and Fittings Technicians have up-to-date knowledge of hoses, hose components, fittings, and accessories.

Slider